Bluetooth

KNULLI supports a lot of different types of Bluetooth devices, such as input devices (controllers, mice, keyboards, etc.) and audio speakers and headphones.

Connect a Bluetooth device

Troubleshooting

If your KNULLI device fails to pair with one of your Bluetooth devices, try disabling Wi-Fi while pairing. (You can enable Wi-Fi again after pairing.)

Also, please be aware that some Bluetooth controllers might be built to only support the system they are made for, e.g., Android or Nintendo Switch. If your Bluetooth controller does not work with your KNULLI device, make sure that it supports Bluetooth for PC.

To connect a Bluetooth device with your KNULLI device, you first need to make sure that both devices support Bluetooth. If so, press Start to bring up the main menu and go to Controller & Bluetooth Settings. Here, you will be able to Enable Bluetooth if it is not enabled, yet.

Once Bluetooth is enabled, either try to Pair Bluetooth Pads Automatically (to automatically pair input-devices in pairing mode) or select Pair A Bluetooth Device Manually and find your device in a list of available Bluetooth devices in your vicinity. If your Bluetooth device does not show up or pairing does not work as expected, check the manual of your Bluetooth device for pairing instructions.

Assigning controllers

After your devices have been paired successfully, you might need to take additional steps in order to use them. For example, after connecting a Bluetooth controller, you will have to assign the controller to a player as explained in the Controls section.

Set up audio output

After pairing an audio output device (like a headphone), you need to set it as your audio output. Press Start to bring up the main menu, head to System Settings and choose your Bluetooth device as Audio output.

Forget a Bluetooth device

If you want to remove or "forget" a paired Bluetooth device, press the Start button to bring up the main menu, head to Controller & Bluetooth Settings, open Forget A Bluetooth Device, find the device and remove it.