Ana içeriğe geç

TrimUI Smart Pro

Overview

Device CPU / Architecture Kernel GL driver Interface
Trimui Smart Pro Allwinner A133 / PowerVR GE8300 Allwinner BSP pvrsrvkm Emulation Station

Installation

Our Quick Start Guide will guide you through the process of installing and setting up KNULLI on the TrimUI Smart Pro.

Extracting the kernel and bootloader

The TrimUI Smart Pro distribution includes a bootloader, u-boot, and kernel in binary form extracted from the stock firmware. There are no public sources provided by TrimUI for those

TrimUI has not published the source code of the u-boot and kernel of the TrimUI Smart Pro. They have published some libraries and SDK, but those do not include the BSP that includes the kernel, u-boot, and bootloader. In order to have a working configuration you have two options:

  • You can use the stock kernel, bootloader, and u-boot from the stock SDCARD. See below for instructions on how to extract those.
  • You can compile the included kernel with the source code of this distribution, however, note that there will be a few elements that are missing

The firwmare included in releases uses the kernel, bootloader, and u-boot from the stock firmware.

You can read this page to learn how to extract the bootloader, u-boot, and kernel from the stock firmware.